| Type: | Power Source Arrester |
|---|---|
| Structure: | Protective Gap |
| Installation: | DIN Rail |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier The surge protection device is suitable for use in AC 50/60Hz power supply systems such as TT, TN-S, TN-C, IT, and TN-C-S. It can be installed at the joint of LPZ1 or LPZ2 and LPZ3 according to IEC61643-1 and GB18802.1 standards. The device is designed with a 35mm standard din rail and includes a failure release module. In case of over-voltage or over-current breakdown, the failure release will disconnect the electric equipment from the power supply system and provide indication signals - green for normal operation and red for abnormal operation. Additionally, the module can be replaced when operating voltage requirements are met.
|
Type
|
CT-C
|
|||||
|
Rated Operating Voltage Un(V)
|
220V/385V
|
|||||
|
Max continuous operating voltage Uc/V
|
275V
|
320V
|
385V
|
385V
|
385V
|
420V
|
|
Voltage protection level up(KV)
|
≤1.0
|
≤1.2
|
≤1.8
|
≤2.0
|
≤2.2
|
≤2.8
|
|
Maximum discharge current Imax(8/20μs)KA
|
5
|
10
|
20
|
30
|
40
|
60
|
|
Nominal discharge current In(8/20μs)KA
|
10
|
20
|
40
|
60
|
80
|
100
|
|
Response times
|
≤25
|
|||||
|
Test Standard
|
IEC61643.1, GB18802.1
|
|||||
|
Operating Environment
|
-40 degree to + 85 degree
|
|||||
|
Max Connection Line
|
35mm2 hard wire/35mm2 strand wire copper line
|
|||||
|
Recommended Connection Line
|
16mm2 hard wire/25mm2 strand wire copper line
|
|||||
|
Installation
|
Standard Rail 35mm
|
|||||
|
Material of outer covering
|
Burning -proof Nylon
|
|||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}